Bestsellers
Sort by
Show result

Brand Image.png

Swift Delivery

Sound Quality

Affordable Prices

RM13.90

Brand Image.png

Swift Delivery

Sound Quality

Affordable Prices

RM3.50

Easy installation even if many floors of buildings

Reduce installation cost

Low noise

High waterproof protection

Full coverage of Ku-Band for analog and digital reception.

 

RM75.00

Brand Image.png

Swift Delivery

Sound Quality

Affordable Prices

RM4.90

Most powerful manufacture -for laying-high tensile strength

RM550.00

PVR Remote Control Original

RM1,000.00

Brand Image.png

Swift Delivery

Sound Quality

Affordable Prices

RM1.90

Brand Image.png

Swift Delivery

Sound Quality

Affordable Prices

RM44.90

 

HDMI Encoding Section

Video

Encoding

MPEG-4AVC/H.264

Resolution

1920*1080p@60,1920*1080p@50,1920*1080i@60,

1920*1080i@50,1280*720p@60,1280*720p@50

Aspect Ratio

16:9, 4:3

Bit rate

1.000~18.000 Mbps

Audio

Encoding

MPEG1LayerII

Sample rate

48KHz

Bit rate

64, 96,128, 192, 256, 320kbps

DVB-T Modulator Section

Standard

DVB-T COFDM

Bandwidth

6M, 7M, 8M

Constellation

QPSK, 16QAM, 64QAM

Code rate

1/2, 2/3, 3/4, 5/6, 7/8

Guard Interval

1/32, 1/16, 1/8, 1/4

Transmission Mode:

2K, 8K

MER

≥31dB

RF frequency

50~950 MHz

RF output level

0~ +6dBm

System

Upgrade

USB

Power supply

DC 12V

Operationtemperature

0~45°C

RM668.00

Brand Image.png

Swift Delivery

Sound Quality

Affordable Prices

RM1.00

Application

Amplifier AI-223 is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers. The amplifier works in full FM + TV band 86 - 862 MHz. As there are no empty spaces in the working band, the amplifier can be used in any cable network. It can also be used to distribute signals in group/community installations. Gain adjustment allows for adequate correction of signal loss in cabling.

The amplifier has a passive return channel 0 - 65 MHz, which allows to connect a cable modem. It also enables operation of remote control extenders, e.g. Power Link.

Security notice for amplifier users

AI-221 and AI-223 amplifiers are fed from internal stabilized power supply. They are not designed for the use in open spaces. They cannot be installed in wet conditions, nor near heaters etc. Providing natural ventilation is a must. To avoid any possible damage, power should not be switched on until all connections have been checked.

Specifications

code

R90452

model

AI-223

outputs

 

2

frequency range

band

return channel

VHF / UHF

 

MHz

0 - 65

86 - 862

gain

dB

-5.5 ±1

25 ±1

gain adjustment dB

15 / 10

max output level

dBuV

105 DIN45004B

noise figure

dB

< 6

reflection attenuat.

dB

> 10

power

V

230±10% 50/60 Hz

 

VA

5.5

Example of application

 

 

 

RM100.00

Brand Image.png

Swift Delivery

Sound Quality

Affordable Prices

RM5.90

Features:

Shows HDMI source on SDI display.

SDI interface operates at bitrates of 2.970 Gbit/s, 2.970/1.001 Gbit/s, 1.485 Gbit/s, 1.485/1.001 Gbit/s and 270 Mb/s.

Supports HDMI input timings: 480i/59.94, 576i, 720p/50/59.94/60, 1080i/50/59.94/60, 1080p/23.98/24/25/29.97/30/50/59.94/60.

Converts HDMI signal to SDI:

480i/576i to SD-SDI (SMPTE 259M-C, at bitrates of 270 Mbit/s)

720p/1080i to HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s or 1.485/1.001 Gbit/s)

1080p to 3G-SDI (SMPTE 424M/425M-AB, at bitrates of 2.970 Gbit/s and 2.970/1.001 Gbit/s)

Supports SDI output distance up to 100 meters (3G-SDI), 200 meters (HD-SDI), or 300 meters (SD-SDI)

Note: Do Not support Broadcast Standard.


Specifications:

ESD Protection Human body model: ±8kV (air-gap discharge), ±4kV (contact discharge)

Dimension: 80mm x 41mm x 25 mm

Weight: 150g

Power Consumption (Max):5W

Inside Package:

3G HDMI to SDI Converter (1pcs)

5V1A DC Power Supply Adaptor (US/EU) (1pcs)

2 round pin Adapter (1pcs)

BNC Connector (1pcs)

Operation Manual (1pcs)

 

RM100.00